• 1. Check steel is placed as per drawing.
• 2. Check rebars are straight.
• 3. Check the diameter of rebar.
• 4. Check spacing of rebar.
• 5. Check hooks and bends are placed as specified by structural designer.
• 6. Check the lap length is accurate.
• 7. Check the clear cover.
• 8. Check cover blocks are enough.
• 9. Check the rebars are rust free.
• 10. Check the rebars are crack free.
• 11. Check minimum 1 inch clear distance is maintained between two bars.
• 12. Check the rods are tied properly with binding wire.